Arch City - Retention Knobs Pullstuds

  Cutting Tools Catalog Drill Bits  Center Drills  Face Mills  End Mills  CAT40 & BT Tooling   NMTB 30 40 50 Taper Tooling  Drill Chucks
     Boring Bars & Heads  Reamers  Carbide Inserts  Turning Tools

  Machinist Supplies Catalog Height gages  123 Blocks  Parallels   Calipers   Dial Indicators   Dial Bore Gauges  Micrometers  Readouts
    GO NOGO Gages  Rout-A Burr   Power Feeds  Lathe Chucks and Toolholders  Vises

To view other cutting tool listings click on the above links:   ^
To order parts:
1- Find item# from the listing below \/                                                                                         Phone orders call * 800-746-9550 * 314-638-1227
2- Locate the item# and description in the Add to cart area                                                                              Call Days, Evenings, Weekends
3- Press Add to cart button. This takes you to checkout.                                                                                  If I'm here I answer the phone
   Please give this a few seconds to update the page                                                                                          Please leave message if no answer
4- You can checkout or return to this or other pages for more shopping                                                           Fax orders toll free 866-219-3613
5- Upon checkout this will take you to Paypal's secure site for processing
  You can pay with Credit Card or E-check. Be sure to leave ship to address and PO# if needed
  You can skip Paypal registration
  Shipping is flat rate of $10.00. Taxes may apply within Missouri
  Usually 1-4 day delivery. Orders under $30 may take longer to ship

Arch City Service 314-638-1227 * 800-746-9550 fax toll free 866-219-3613 please leave message parts@archcity.net

After pressing Add to Cart button please give the page a few seconds to update

Leading Import

202-5921
CAT30 Pullstud M12-1.75 Thread
L=1.69 L1=.707 A=45
D1=.431 D2=.274
- $11.00

202-5922
CAT30 Pullstud M12-1.75 Thread
L=1.69 L1=.707 A=60
D1=.431 D2=.274
- $11.00

202-5935
CAT30 Pullstud M12-1.75 Thread
L=1.69 L1=.707 A=45
D1=.431 D2=.274 D3=.110
- $13.00

202-5927
CAT40 Pullstud 5/8-11 Thread
L=1.625 L1=.440 A=45
D1=.740 D2=..490 D3=.280
- $12.00

202-5928
CAT40 Pullstud 5/8-11 Thread
L=1.625 L1=.404 A=45
D1=.740 D2=.490
- $11.00

202-5938
CAT40 Pullstud 5/8-11 Thread
L=2.265 L1=1.0 A=45
D1=.588 D2=.392
- $11.50

202-5939
CAT40 Pullstud 5/8-11 Thread
L=2.25 L1=1.139 A=45
D1=.594 D2=.406
- $11.50

202-5925
CAT40 Pullstud 5/8-11 Thread
L=2.25 L1=.988 A=45
D1=.589 D2=.392
- $11.00

202-5931
CAT40 Pullstud 5/8-11 Thread
L=2.25 L1=.988 A=60
D1=.589 D2=.392
- $11.50

202-5930
CAT40 Pullstud 5/8-11 Thread
L=2.25 L1=.988 A=90
D1=.589 D2=.392
- $11.50

202-5943
CAT40 Pullstud 5/8-11 Thread
L=1.624 L1=.440 A=45
D1=.740 D2=.490 D3=.280
- $12.00

202-5944
CAT40 Pullstud 5/8-11 Thread
L=2.265 L1=.988 A=45
D1=.589 D2=.392
- $14.00

202-5945
CAT40 Pullstud 5/8-11 Thread
L=2.125 L1=.988 A=45
D1=.588 D2=.392 D3=.280
- $11.00

202-5946
CAT40 Pullstud 5/8-11 Thread
L=1.880 L1=.787 A=75
D1=.747 D2=.549 D3=.278
- $14.00

202-5947
BT40 Pullstud M16-2.0 Thread
L=1.612 L1=.552 A=45
D1=.740 D2=.490
- $11.50

202-5923
BT40 Pullstud M16-2.0 Thread
L=2.360 L1=1.376 A=45
D1=.589 D2=.392
- $11.50

202-5924
BT40 Pullstud M16-2.0 Thread
L=2.360 L1=1.1 A=60
D1=.589 D2=.392
- $11.50

202-5950
BT40 Pullstud M16-2.0 Thread
L=2.360 L1=1.10 A=90
D1=.589 D2=.392
- $11.50

202-5951
CAT50 Pullstud 1-8 Thread
L=2.300 L1=.70 A=45
D1=1.140 D2=.82
- $14.50

202-5952
CAT50 Pullstud 1-8 Thread
L=3.350 L1=1.384 A=45
D1=.903 D2=.668
- $14.50

202-5932
CAT50 Pullstud 1-8 Thread
L=3.350 L1=1.384 A=60
D1=.903 D2=.668
- $14.50

202-5954
CAT50 Pullstud 1-8 Thread
L=3.350 L1=1.384 A=90
D1=.903 D2=.668
- $14.50

202-5955
CAT50 Pullstud 1-8 Thread
L=3.080 L1=1.778 A=45
D1=.903 D2=.668
- $14.50

202-5956
CAT50 Pullstud 1-8 Thread
L=2.300 L1=.700 A=45
D1=1.140 D2=.82
- $15.00

202-5957
CAT50 Pullstud 1-8 Thread
L=3.355 L1=1.384 A=45
D1=.903 D2=.668
- $15.00

Click this link to Machinist Jokes & CNC Humor

e>